Installing thin stone veneer involves preparing a suitable wall surface, selecting the correct mortar, arranging the stones, applying them according to the manufacturer's instructions, and finishing the joints where required. Proper substrate preparation, moisture management, and curing are essential for a durable installation, particularly on exterior walls exposed to Canadian weather.
Step 1: Gather the Tools for Thin Stone Veneer Installation
Firstly, make sure to have all the necessary tools :
-Bucket
-Trowel
-Cement
-Mixer
-Diamond blade saw
-Brush
-Drill
-Safety glasses and gloves
-Measuring tape
-Level
Step 2: Prepare the Wall Surface
Prepare your walls following the national building codes, in order to guarantee a safe project.
Tip - Open the boxes of thin veneer product to mix the pieces, as a result the thin veneer stones will have a proper blend of size and color.
Step 3: Mix the Recommended Stone Veneer Mortar
Follow the manufacturer's instructions to mix the polymer cement mortar. Be sure to work from the bottom of the wall upwards in order to facilitate the installation.
Step 4: Install the Thin Stone Veneer
Apply 1/4" polymer cement on the back of the stone and 1/4" on the wall surface. Apply even pressure on the stone to ensure proper bond between the wall surface and the stone. Small amounts of excess polymere glue should overflow on the sides of the stone. If no polymer is seen from the sides, apply more mortar on the back of the stone. There are two types of thin veneer stones available : with mortar joint or without mortar joint. In the case of a thin veneer stone with a mortar joint, the size of the mortar joints can vary depending on personal taste.
Tip : In the case of a thin veneer stone installation without mortar joints, a small piece of wood trim can be placed between the stones to obtain the desired joint width and help maintain joint width consistency.
*It is important to always wear gloves and safety goggles when cutting any Rinox walls and stones. These products should be cut with a diamond blade saw.
Step 5: Allow the Mortar to Cure
Wait 12 hours for mortar joint glue to dry.
Step 6: Finish the Joints and Clean the Surface
*Optional : In the case of a thin veneer stone with mortar joints, following the Rinox Linea system, begin filling the joints. Try to avoid getting jointing mortar cement on the surface of the stone. If this happens, wait until the mortar becomes slightly dry before removing it with a brush.
That's it! Six easy steps to stone installation.
For inspiration on thin veneer, decorative, interior & exterior stone visit our Alternative Masonry Collection. For other ideas visit our Lookbook!
By following these steps, you can achieve a professional-quality installation of thin veneer stone that enhances the beauty and durability of any interior or exterior space.
Looking for some tips for your home? Watch this DIY thin veneer stone installation video using our alternative masonry products featuring Carson Arthur, your Outdoor Design and Landscape Expert!
